Cisco N5010P-N2K-BE, Software Configuration Manual

Page: 333 / 704

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
22-5
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 22 Configuring User Accounts and RBAC
Configuring RBAC
The following example shows how to configure a user account:
switch# configure terminal
switch(config)# username NewUser password 4Ty18Rnt
switch(config)# exit
switch# show user-account
switch# copy running-config startup-config
Configuring RBAC
This section includes the following topics:
•
Creating User Roles and Rules, page 22-5
• Changing User Role Interface Policies, page 22-7
Creating User Roles and Rules
Each user role can have up to 256 rules. You can assign a user role to more that one user account.
The rule number you specify determines the order in which the rules are applied. Rules are applied in
descending order. For example, if a role has three rules, rule 3 is applied before rule 2, which is applied
before rule 1.
To create user roles and specify rules, perform this task:
Step 5
switch# show user-account
(Optional) Displays the role configuration.
Step 6
switch# copy running-config
startup-config
(Optional) Copies the running configuration to the
startup configuration.
Command Purpose
Command Purpose
Step 1
switch# configure terminal
Enters configuration mode.
Step 2
switch(config)# role name role-name
Specifies a user role and enters role configuration
mode. The
role-name argument is a case-sensitive,
alphanumeric character string with a maximum length
of 16 characters.