S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
17-14
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 17 Configuring RADIUS
Example RADIUS Configuration
The following example shows how to display statistics:
switch#
show radius-server statistics 10.10.1.1
Example RADIUS Configuration
The following example shows how to configure RADIUS:
radius-server key 7 "ToIkLhPpG"
radius-server host 10.10.1.1 key 7 "ShMoMhTl" authentication accounting
aaa group server radius RadServer
server 10.10.1.1
use-vrf management
Default Settings
Table 17-1
lists the default settings for RADIUS parameters.
Command
Purpose
switch# switch#
show radius-server
statistics
{
hostname
|
ipv4-address
|
ipv6-address
}
Displays the RADIUS statistics.
Table 17-1
Default RADIUS Parameters
Parameters
Default
Server roles
Authentication and accounting
Dead timer interval
0 minutes
Retransmission count
1
Retransmission timer interval
5 seconds
Idle timer interval
0 minutes
Periodic server monitoring username
test
Periodic server monitoring password
test
Summary of Contents for N5010P-N2K-BE
