manualshive.com logo in svg

Cisco MCS-7825-H3-IPC1, Service Manual

Share
Download
Cisco MCS-7825-H3-IPC1 Service Manual Download Page 66

2-24

Cisco Unified Communications Manager Managed Services Guide

OL-22523-01

Chapter 2      New and Changed Information

Cisco Unified Communications Manager, Release 8.0(2)

Unified CM clusters only

: Cisco does not recommend that you activate the service on all the servers in 

a cluster. Cisco recommends that you activate this service only on one of the servers of a cluster where 
call-processing activity is the least.

In a Cisco Unified Communications Manager Business Edition 5000 system, this service supports Cisco 
Unified Communications Manager only.

The following states the recommendation for the newly added service:

Cisco Unified Communications Manager, Release 8.0(2)

The Cisco Unified Real-Time Monitoring Tool runs on both the Cisco Intercompany Media Engine 
server and the Cisco Unified Communications Manager servers to provide information about system and 
feature health. 

You can install RTMT onto a client machine from only one product type—Cisco Unified 
Communications Manager or Cisco Intercompany Media Engine. Installing RTMT client from different 
product types on the same client machine is not supported.

For information on installing RTMT on a Cisco Intercompany Media Engine server, refer to the 

Cisco 

Intercompany Media Engine Installation and Configuration Guide

.

For information on installing RTMT on a Cisco Unified Communications Manager server, refer to the 

Cisco Unified Real-Time Monitoring Tool Administration Guide

.

This section describes the new and changed information in Cisco Unified Communications Manager, 
Release 8.0(2). It contains information on new performance objects, and alerts for both the Cisco Unified 
Communications Manager server and the Cisco Intercompany Media Engine server.

•

Cisco Unified Communications Manager Server, page 2-24

•

Cisco Intercompany Media Engine Server, page 2-25

Cisco Unified Communications Manager Server

Performance Objects

The following performance objects are available on the Cisco Unified Communications Manager server 
to support Cisco Intercompany Media Engine. For descriptions of the objects and related counters, refer 
to the 

Cisco Intercompany Media Engine Installation and Configuration Guide

.

•

IME Client

•

IME Client Instance

Alerts

The following alerts are available on the Cisco Unified Communications Manager server to support 
Cisco Intercompany Media Engine. For descriptions and default configuration settings, refer to the 

Cisco 

Intercompany Media Engine Installation and Configuration Guide

.

•

IMEDistributedCacheInactive

Service/ Servlet

Activation Recommendations

Cisco Dialed Number Analyzer Server

If you have more than one node in the cluster, 
activate this service on one node that is dedicated 
specifically for the Cisco Dialed Number 
Analyzer service. 

Summary of Contents for MCS-7825-H3-IPC1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands