manualshive.com logo in svg

Cisco MCS-7825-H3-IPC1, Service Manual

Share
Download
Cisco MCS-7825-H3-IPC1 Service Manual Download Page 302

6-68

Cisco Unified Communications Manager Managed Services Guide

OL-22523-01

Chapter 6      Cisco Unified Serviceability Alarms and CiscoLog Messages

Alert-Level Alarms

Recommended Action

Review the System Reports provided in the Cisco Unified Reporting tool, specifically the Cisco Unified 
CM Database Status report, for any anomalous activity. Check network connectivity to the server that is 
running the database. If your system uses DNS, check the DNS configuration for any errors. 

InvalidCredentials

Credential Failure to IME server.

The connection to the IME server could not be completed, because the username and/or password 
configured on Unified CM do not match those configured on the IME server.

Cisco Unified Serviceability Alarm Definition Catalog

CallManager/CallManager

Severity

ALERT

Recommended Action

The alarm will include the username and password which were used to connect to the IME server, along 
with the IP address of the target IME server and its name. Log into the IME server and check that the 
username and password configured there match those configured in Unified CM.

Routing List 

SDL

SDI

Sys Log

Event Log

Alert Manager

Parameter(s)

User name(String)

IP address(String)

Server name(String)

History

Cisco Unified Communications
Release

Action

8.0(1)

New Alarm for this release.

Summary of Contents for MCS-7825-H3-IPC1















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands