Getting Started
Using the Web Administration User Interface
Cisco SPA and Wireless IP Phone Administration Guide
27
2
Understanding Administrator and User Views
Depending on whether you are a VAR or service provider, you might have different
privileges. By default, the Administrator account name is
admin
, and the User
account name is
user
. These account names cannot be changed.
If the service provider set an Administrator account password, you are prompted
for it when you click Admin Login.
The Administrator account can modify all web profile parameters, including web
parameters available to the user login. The Administrator specifies the parameters
that a User account can modify using the Provisioning tab of the web UI.
Accessing Administrative Options
To access administrative options, either:
•
Log in to the web interface, then click Admin Login.
•
Enter the following URL when accessing the interface:
http://phone.ip.address/admin/
Understanding Basic and Advanced Views
These views are similar, but
advanced
view shows more options on each web
page. To see all available options for your login, use the
advanced
view.
NOTE:
No default passwords are assigned to
either the Administrator or User accounts. Only
the Administrator account can assign and
change passwords.
NOTE:
To save changes on a web page, click
Submit All Changes before switching between
User and Admin Login or between basic and
advanced views. Switching logins or views
discards any unsubmitted changes.
