Cisco Linksys PAP2 Administration Manual Download Page 131

Page: 131 / 280

Configuring Security, Quality, and Network Features

Setting Optional Network Parameters

Cisco SPA and Wireless IP Phone Administration Guide

129

STEP 5

Click Submit All Changes.

Setting Optional Network Parameters

STEP 1

STEP 2

Click Admin Login and advanced.

STEP 3

Click the System tab.

STEP 4

Configure the following fields:

PPPoE Login Password

Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.

PPPoE Service Name

Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.

Parameter

Description

Parameter

Description

Host Name

The host name of the phone.

Domain

The network domain of the phone. However, if using
LDAP, see

Configuring Lightweight Directory Access

Protocol (LDAP), page 77

Primary DNS

DNS server used by the phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the primary DNS server.

Defaults to 0.0.0.0.

However, if using LDAP, see

Configuring Lightweight

Directory Access Protocol (LDAP), page 77

Secondary DNS

DNS server used by the phone in addition to DHCP
supplied DNS servers if DHCP is enabled; when DHCP
is disabled, this is the secondary DNS server.

Defaults to 0.0.0.0.

Summary of Contents for Linksys PAP2

























































































































































































































































































Search results

Summary of Contents for Linksys PAP2

Reviews:

Related manuals for Linksys PAP2

Brands by name

Popular brands

Cisco Linksys PAP2, Administration Manual

Search results

Summary of Contents for Linksys PAP2

Reviews:

Related manuals for Linksys PAP2

Brands by name

Popular brands