Getting Started
Using the Web Administration User Interface
Cisco SPA and Wireless IP Phone Administration Guide
25
2
Using the Web Administration User Interface
You must be connected to the same network as your phone. For example, if you
are connected to a VPN, you must first disconnect.
NOTE
If you are using the SPA525G with the Cisco Unified Communications 500 Series
for Small Business for Call Control, use Cisco Unified Communication Manager
Express or Cisco Configuration Assistant for phone administration. For more
information, refer to the
Cisco Unified Communications 500 Office Administrator
Guide
.
To access the IP phone administration web user interface (UI):
STEP 1
Launch a web browser on a computer that can reach the phone on the network.
STEP 2
Direct the browser to the IP address of the phone. To determine the IP address:
•
SPA9X2: Press the Setup button, then select Network. The
Current IP
field
shows the phone’s current IP address.
•
WIP310: In the Home screen, press Options and highlight
Phone Info
. Press
the Select button.
•
SPA525G: Press the Setup button, then select Status. Select
Network
Status
. The IP address is displayed.
STEP 3
Enter the IP address in your web browser address bar. For example:
http://192.168.1.8
