2-25
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
78-6511-08
Chapter 2 Getting Started with CMS
Menus and Toolbar
Topology View Popup Menus
These popup menus are available in the Topology view.
Link Popup Menu
You can display reports and graphs for a specific link displayed in the Topology view (
Table 2-19
). To
display the link popup menu, click the link icon, and right-click.
The Link Report and Link Graph options are not available if at both ends of the link are
•
Candidate switches
•
Catalyst 1900 and Catalyst 2820 switches
•
Devices that are not eligible to join the cluster
If multiple links are configured between two devices, when you click the link icon and right-click, the
Multilink Content window appears (
Figure 2-10
). Click the link icon in this window, and right-click to
display the link popup menu specific for that link.
Figure 2-10 Multilink Decomposer Window
Table 2-19 Link Popup Menu
Popup Menu Option
Task
Link Report
Display the link report for two connected devices. If one device is an unknown
device or a candidate, only the cluster member side of the link displays.
Link Graph
Display a graph showing the bandwidth used by the selected link.
Properties
Display information about the device and port on either end of the link and the
state of the link.
