manualshive.com logo in svg

Cisco Catalyst 2900 Series XL, Software Manual

The Cisco Catalyst 2900 Series XL, a powerful networking solution, is equipped with advanced features to ensure seamless data transfer. For comprehensive guidance on its software functionalities, we offer a free Software Manual download on our website. Explore the incredible potential of this product at manualshive.com.

Share
Download
background image

 

A-30

Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide

78-6511-08

Appendix A      System Messages

Error Message and Recovery Procedures

Error Message

PRUNING-1-JOININVLEN: Join rx on trunk [chars]-invalid len: [dec] 

([dec])

Explanation

No explanation is available at this time.

Recommended Action

Copy the error message exactly as it appears on the console or in the system log. 

Enter the show tech-support command to gather data that might provide information to determine 
the nature of the error. If you cannot determine the nature of the error from the error message text or 
from the show tech-support output, contact your Cisco technical support representative, and provide 
the representative with the gathered information.

Error Message

PRUNING-1-JOININVLSTV: Join rx on trunk [chars]-invalid last vlan: 

[dec]

Explanation

No explanation is available at this time.

Recommended Action

Copy the error message exactly as it appears on the console or in the system log. 

Enter the show tech-support command to gather data that might provide information to determine 
the nature of the error. If you cannot determine the nature of the error from the error message text or 
from the show tech-support output, contact your Cisco technical support representative, and provide 
the representative with the gathered information.

Error Message

PRUNING-3-INVASSOC: Invalid vlan local assoc: [hex] ([chars])

Explanation

No explanation is available at this time.

Recommended Action

Copy the error message exactly as it appears on the console or in the system log. 

Enter the show tech-support command to gather data that might provide information to determine 
the nature of the error. If you cannot determine the nature of the error from the error message text or 
from the show tech-support output, contact your Cisco technical support representative, and provide 
the representative with the gathered information.

Error Message

PRUNING-3-INVLNKST: Invalid link state:[hex]

Explanation

No explanation is available at this time.

Recommended Action

Copy the error message exactly as it appears on the console or in the system log. 

Enter the show tech-support command to gather data that might provide information to determine 
the nature of the error. If you cannot determine the nature of the error from the error message text or 
from the show tech-support output, contact your Cisco technical support representative, and provide 
the representative with the gathered information.

Error Message

PRUNING-3-INVPMODE: Invalid pruning mode:[hex]

Explanation

No explanation is available at this time.

Recommended Action

Copy the error message exactly as it appears on the console or in the system log. 

Enter the show tech-support command to gather data that might provide information to determine 
the nature of the error. If you cannot determine the nature of the error from the error message text or 
from the show tech-support output, contact your Cisco technical support representative, and provide 
the representative with the gathered information.

Summary of Contents for Catalyst 2900 Series XL

















































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2900 Series XL

3xLogic V250 Quick Start Manual preview
V250
Brand: 3xLogic Pages: 2
Lantronix Device Server UDS 10 Hardware Manual preview
Device Server UDS 10
Brand: Lantronix Pages: 8
Paradyne MCC Installation Instructions Manual preview
MCC
Brand: Paradyne Pages: 11
Paradyne Hotwire 8784 Installation Instructions Manual preview
Hotwire 8784
Brand: Paradyne Pages: 19
Paradyne Hotwire 7995 Installation Instructions Manual preview
Hotwire 7995
Brand: Paradyne Pages: 32
Paradyne COMSPHERE 3550 Series User Manual preview
COMSPHERE 3550 Series
Brand: Paradyne Pages: 153
Paradyne Jetstream CPX-1000 Reference Manual preview
Jetstream CPX-1000
Brand: Paradyne Pages: 141
Paradyne FrameSaver 9783 Installation Instructions Manual preview
FrameSaver 9783
Brand: Paradyne Pages: 28
Paradyne COMSPHERE 6800 Series Installation And Enabling/Disabling Instructions preview
COMSPHERE 6800 Series
Brand: Paradyne Pages: 7
NetBurner MOD5272 Quick Start Manual preview
MOD5272
Brand: NetBurner Pages: 15
HARTING HAIIC MICA Hardware Development Manual preview
HAIIC MICA
Brand: HARTING Pages: 13
C&H Active Module Carrier VX402C-64 User Manual preview
Active Module Carrier VX402C-64
Brand: C&H Pages: 32
3Com 3C13640 Installation Manual preview
3C13640
Brand: 3Com Pages: 32
ADTRAN EXPRESS 6503 User Manual preview
EXPRESS 6503
Brand: ADTRAN Pages: 20
Tripp Lite N201-003-WH Specifications preview
N201-003-WH
Brand: Tripp Lite Pages: 2
Lanner ECA-4027 User Manual preview
ECA-4027
Brand: Lanner Pages: 99
Matrix Switch Corporation MSC-XD88S Product Manual preview
MSC-XD88S
Brand: Matrix Switch Corporation Pages: 60
H3C SecPath F50X0 Series Manual preview
SecPath F50X0 Series
Brand: H3C Pages: 41

Brands by name

Popular brands

Load more brands