Cisco AS5300 - Universal Access Server, Software Configuration Manual, Page: 97 / 198

Basic Configuration 3-63
Saving Configuration Changes
Saving Configuration Changes
To prevent the loss of the access server configuration, save it to NVRAM.
Configure
Comprehensive Configuration Examples
This section includes three sample outputs of the show config command. If you are experienced with
the Cisco IOS software, you might find this a useful reference for configuration.
Octal E1/PRI Card with Four Serial Interfaces
5300# show config
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug datetime msec localtime
service timestamps log datetime localtime show-timezone
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname elnino_uut
!
no logging buffered
logging monitor notifications
enable password lab
!
bert profile default pattern 220-O.151QRSS threshold 10^-6 error-injection none
duration 10
ip subnet-zero
ip ftp source-interface Ethernet0
ip ftp username melai
no ip domain-lookup
ip domain-name cisco.com
!
isdn switch-type primary-net5
chat-script dial "" "ATDT\T" TIMEOUT 120 CONNECT \p
Table 3-31 Saving Configuration Changes
Step Command Purpose
1
5300> enable
Password: <password>
5300#
Enter enable mode (also called
privileged EXEC mode).
Enter the password.
You have entered enable mode when the
prompt changes to
5300#
.
2
5300# copy running-config startup-config
Save the configuration changes to
NVRAM so that they are not lost during
resets, power cycles, or power outages.
3
5300(config-if)# Ctrl-Z
5300#
%SYS-5-CONFIG_I: Configured from console by
console
Return to enable mode.
This message is normal and does not
indicate an error.