Cisco AS5300 - Universal Access Server, Software Configuration Manual, Page: 71 / 198

Basic Configuration 3-37
Configure
.
Table 3-21 Creating Customer Profiles
Step Command Purpose
1
5300# configure terminal
Enter configuration commands, one per line. End
with CNTL/Z.
5300(config)#
Enter global configuration mode. You
have entered global configuration mode
when the prompt changes to
5300(config)#.
2
5300(config)# resource-manager profile customer
name
Create a profile for a specific customer.
Within this profile, you can set
maximum simultaneous connection
limits, define the physical resources that
will be provide to the customer profile,
and assign a specific DNIS group to be
allowed into the customer profile.
3
5300(config-customer-profile)# resource name
{digital | speech | v110 | v120}
Include a group of physical resources
and call type(s) in the customer profile.
1
Replace the name variable with the
name of a physical group resource that
you created using the resource-manager
group resource name command.
1. The digital call type specifies synchronous data calls that terminate on a HDLC framers, such as a ISDN circuit switched data call
initiated by a terminal adapter connected to a PC (unlike an asynchronous analog modem call using start and stop bits). The speech
call type specifies normal voice calls, such as calls initiated by analog modems. The v110 and v120 call types specify V.110 and
V.120 calls.
4
5300(config-customer-profile)# limit size number
Define the maximum number of
simultaneous connections that can be
performed by the sum total of all the
physical resources in the customer
profile. This size limit applies to all the
call types allowed into the profile, such
as digital, speech, V.110, and V.120).
5
5300(config-customer-profile)# dnis-group name
name
Identify the DNIS group that you want to
include in this customer profile.
Replace the name variable with the
name of a DNIS group that was created
using the resource-manager group dnis
name command.
2
2. Use the dnis-group default command to allow a customer profile to accept any DNIS number and use only the call-type to
discriminate (for example, digital, speech, V.110, and V.120).
5
5300(config-customer-profile)# Ctrl-Z
5300#
Return to enable mode.