Cisco AS5300 - Universal Access Server, Software Configuration Manual, Page: 118 / 198

Configuring Authentication
Cisco AS5300 Universal Access Server Software Configuration Guide 4-12
In the following example, the ARA authentication method list name is callback (because
asynchronous callback is used on the access server):
5300# configure terminal
5300(config)# aaa authentication arap callback
In the following example, the login authentication method list name is deveng:
5300# configure terminal
5300(config)# aaa authentication login deveng
Specify the Authentication Method
After you identify a list name, you must specify an authentication method. An authentication method
identifies how users are authenticated. For example, will users be authenticated by a local security
database resident on the access server (local method)? Will they be authenticated by a remote
security database, such as by a or RADIUS daemon? Will guest access to an AppleTalk
network be permitted?
Authentication methods are defined with optional keywords in the aaa authentication command.
See Tables 4-5 and 4-6.
Table 4-5 Authentication Methods for PPP
Timesaver
If you are not sure whether you should use or RADIUS, here are some comparisons:
encrypts the entire payload of packets passed across the network, whereas RADIUS only encrypts
the password when it crosses the network. can query the security server multiple times, whereas
a RADIUS server gives one response only and is therefore not as flexible regarding per-user authentication
and authorization attempts. Moreover, RADIUS does not support authentication of ARA.
Table 4-6 Authentication Methods for ARA
Method Description
if-needed Authenticates only if not already authenticated. No duplicate authentication.
krb5 Specifies Kerberos 5 authentication.
local Uses the local username database in the access server. This is defined with the
username global configuration command.
none No authentication is required. Do not prompt for a username or password.
radius Use RADIUS authentication as defined on a RADIUS security server.
Use authentication as defined on a security server.
Method Description
auth-guest Allows guests to log in only if they have already been authenticated at the EXEC.
guest Allows guests to log in.
line Uses the line (login) password for authentication.
local Uses the local username database in the access server for authentication. This
database is defined with the username global configuration command.
Use authentication as defined on a security server.
12
6
9 3