Cisco AS5300 - Universal Access Server, Software Configuration Manual, Page: 179 / 198

Continuing the Setup Script for E1/PRI Cards
Using Setup on Cisco IOS Releases 11.2 or 11.3(2)T C-19
Step 8 Enter the letter corresponding to the tone signaling type:
The following tone signaling types are available:
[a] dtmf
[b] r2-compelled
[c] r2-non-compelled
[d] r2-semi-compelled
Enter the tone signaling type [b]:
Step 9 Press Enter to provision ANI address information over E1 lines:
Do you want to provision ANI address information? [yes]:
Step 10 Enter the number corresponding to the country for which you are configuring R2
signaling:
R2 signaling is available for the following countries:
[0] itu
[1] argentina
[2] australia
[3] brazil
[4] china
[5] columbia
[6] costarica
[7] easteurope
[8] ecuador itu
[9] ecuador lme
[10] greece
[11] guatemala
[12] hongkong-china
[13] indonesia
[14] israel
[15] korea
[16] malaysia
[17] newzealand
[18] paraguay
[19] peru
[20] philippines
[21] singapore
[22] saudiarabia
[23] southafrica-panaftel
[24] telmex
[25] telnor
[26] thailand
[27] uruguay
[28] venezuela
[29] vietnam
Enter the country name [0]:
Step 11 Set the CAS configuration options for the next controller you are configuring. Repeat
Step 4 to Step 10 to configure the options:
Configuring controller E1 2:
Will you be using CE1 (channel associated signaling) on this controller? [yes]:
The following framing types are available: no-crc4 | crc4
Enter the framing type [crc4]:
The following linecode types are available: ami | hdb3
Enter the line code type [hdb3]:
The following line signaling types are available:
[a] e&m-fgb
[b] e&m-fgd
[c] e&m-immediate-start