manualshive.com logo in svg

Cisco 7942G - Unified IP Phone VoIP, Software Manual

The Cisco 7942G is a highly efficient Unified IP Phone VoIP for seamless communication. To enhance your user experience, download the comprehensive Administration Manual free of cost from our website. This manual provides step-by-step instructions and insights on utilizing the product to its full potential.

Share
Download
background image

 

8-5

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0

OL-15483-01

Chapter 8      Monitoring the Cisco Unified IP Phone Remotely

    Network Configuration

Network Configuration

The Network Configuration area on a phone’s web page displays network configuration information and 
information about other phone settings. 

Table 8-2

 describes these items.

You can view and set many of these items from the Network Configuration Menu and the Device 
Configuration Menu on the Cisco Unified IP Phone. For more information, see 

Chapter 5, “Configuring 

Features, Templates, Services, and Users.”

To display the Network Configuration area, access the web page for the phone as described in the 

“Accessing the Web Page for a Phone” section on page 8-2

, and then click the 

Network Configuration

 

hyperlink.

Table 8-2

Network Configuration Area Items 

Item

Description

DHCP Server

IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the 
phone obtains its IP address.

BOOTP Server

Indicates whether the phone obtains its configuration from a Bootstrap Protocol (BootP) 
server.

MAC Address

Media Access Control (MAC) address of the phone.

Host Name

Host name that the DHCP server assigned to the phone.

Domain Name

Name of the Domain Name System (DNS) domain in which the phone resides.

IP Address

Internet Protocol (IP) address of the phone.

Subnet Mask

Subnet mask used by the phone.

TFTP Server 1

Primary Trivial File Transfer Protocol (TFTP) server used by the phone.

Default Router 1–5

Default router used by the phone (Default Router 1) and optional backup routers (Default 
Router 2–5).

DNS Server 1–5

Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS 
servers (DNS Server 2–5) used by the phone.

Operational VLAN ID

Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco Catalyst switch in 
which the phone is a member.

Admin. VLAN ID

Auxiliary VLAN in which the phone is a member.

Summary of Contents for 7942G - Unified IP Phone VoIP



















































































































































































































Reviews:

No comments

Related manuals for 7942G - Unified IP Phone VoIP

i.safe MOBILE IS330.1 Quick Start Manual preview
IS330.1
Brand: i.safe MOBILE Pages: 21
Yealink W56B Quick Start Manual preview
W56B
Brand: Yealink Pages: 12
Pantech Matrix Pro User Manual preview
Matrix Pro
Brand: Pantech Pages: 261
Blackberry 8100 SMARTPHONE User Manual preview
8100 SMARTPHONE
Brand: Blackberry Pages: 230
HTC 10 evo Quick Start Manual preview
10 evo
Brand: HTC Pages: 4
Blackberry Rogers User Manual preview
Rogers
Brand: Blackberry Pages: 17
Sonim XP5520 Bolt User Manual preview
XP5520 Bolt
Brand: Sonim Pages: 89
CHI MEI F902 Quick Start Manual preview
F902
Brand: CHI MEI Pages: 26
ShoreTel IP480 Quick Reference Manual preview
IP480
Brand: ShoreTel Pages: 3
Njoy Leia 7 User Manual preview
Leia 7
Brand: Njoy Pages: 20
Samsung SM-A025F User Manual preview
SM-A025F
Brand: Samsung Pages: 95
Zte Blade Force User Manual preview
Blade Force
Brand: Zte Pages: 156
LG GX300 User Manual preview
GX300
Brand: LG Pages: 106
Nokia Mediamaster 210 Owner'S Manual preview
Mediamaster 210
Brand: Nokia Pages: 40
Nokia Lumia 510 Service Manual preview
Lumia 510
Brand: Nokia Pages: 44
Nokia Lumia 350 User Manual preview
Lumia 350
Brand: Nokia Pages: 62
Nokia Mirage User Manual preview
Mirage
Brand: Nokia Pages: 101
Nokia Lumia 510 User Manual preview
Lumia 510
Brand: Nokia Pages: 96

Brands by name

Popular brands

Load more brands