manualshive.com logo in svg

Cisco 7942G - Unified IP Phone VoIP, Software Manual

The Cisco 7942G is a highly efficient Unified IP Phone VoIP for seamless communication. To enhance your user experience, download the comprehensive Administration Manual free of cost from our website. This manual provides step-by-step instructions and insights on utilizing the product to its full potential.

Share
Download
background image

 

5-3

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0

OL-15483-01

Chapter 5      Configuring Features, Templates, Services, and Users

    Telephony Features Available for the Cisco Unified IP Phone

Barge (and cBarge)

Allows a user to join a non-private call on a shared 
phone line. Barge features include cBarge and 
Barge.

  •

cBarge adds a user to a call and converts it into 
a conference, allowing the user and other 
parties to access conference features.

  •

Barge adds a user to a call but does not convert 
the call into a conference.

The phones support Barge in two conference 
modes:

  •

Built-in conference bridge at the target device 
(the phone that is being barged). This mode 
uses the 

Barge

 softkey.

  •

Shared conference bridge. This mode uses the 

cBarge

 softkey.

For more information, refer to:

  •

Cisco Unified Communications Manager 
Administration Guide, “

Cisco Unified IP 

Phone Configuration” chapter.

  •

Cisco Unified Communications Manager 
System Guide, “

Cisco Unified IP Phones” 

chapter.

  •

Cisco Unified Communications Manager 
Features and Services Guide, “

Barge and 

Privacy” chapter.

Block external to 
external transfer

Prevents users from transferring an external call to 
another external number.

For more information, refer to 

Cisco Unified 

Communications Manager Features and 
Services Guide

, “External Call Transfer 

Restrictions” chapter.

Busy Lamp Field 
(BLF)

Allows a user to monitor the call state of a 
directory number associated with a speed-dial 
button, call log, or directory listing on the phone.

For more information, refer to 

Cisco Unified 

Communications Manager Features and 
Services Guide

, “Presence” chapter.

Busy Lamp Field 
(BLF) Pickup

Provides enhancements to BLF speed dial. Allows 
you to configure a Directory Number (DN) that a 
user can monitor for incoming calls. When the DN 
receives an incoming call, the system alerts the 
monitoring user, who can then pick up the call.

For more information, refer to 

Cisco Unified 

Communications Manager Feature and 
Services Guide,

 “Call Pickup” chapter.

Call Back

Provides users with an audio and visual alert on the 
phone when a busy or unavailable party becomes 
available.

For more information, refer to:

  •

Cisco Unified Communications Manager 
System Guide, “

Cisco Unified IP Phones” 

chapter.

  •

Cisco Unified Communications Manager 
Features and Services Guide

, “Call Back” 

chapter.

Table 5-1

Telephony Features for the Cisco Unified IP Phone (continued)

Feature

Description Configuration 

Reference

Summary of Contents for 7942G - Unified IP Phone VoIP



















































































































































































































Reviews:

No comments

Related manuals for 7942G - Unified IP Phone VoIP

Samsung SPH-M840 Online User'S Manual preview
SPH-M840
Brand: Samsung Pages: 193
Samsung SPH-M840 User Manual preview
SPH-M840
Brand: Samsung Pages: 168
Easiphone MM461 Instruction Manual preview
MM461
Brand: Easiphone Pages: 89
Grandstream Networks GXP1520 Quick Installation Manual preview
GXP1520
Brand: Grandstream Networks Pages: 29
Gigaset PREMIUM 300 Manual preview
PREMIUM 300
Brand: Gigaset Pages: 88
Lephone w2 User Manual preview
w2
Brand: Lephone Pages: 23
Alcatel One Touch 903 Smart Quick Start Manual preview
One Touch 903 Smart
Brand: Alcatel Pages: 21
3Skypephone 3Skypephone S2 User Manual preview
3Skypephone S2
Brand: 3Skypephone Pages: 36
Ericsson R290SAT User Manual preview
R290SAT
Brand: Ericsson Pages: 71
IPRO S-401 User Manual preview
S-401
Brand: IPRO Pages: 72
Haier D1100P User Manual preview
D1100P
Brand: Haier Pages: 34
Haier C2060 User Manual preview
C2060
Brand: Haier Pages: 39
Haier C2076 User Manual preview
C2076
Brand: Haier Pages: 32
Haier C6000 User Manual preview
C6000
Brand: Haier Pages: 35
Haier C6200 User Manual preview
C6200
Brand: Haier Pages: 36
Haier D1200 User Manual preview
D1200
Brand: Haier Pages: 49
Haier C3000 User Manual preview
C3000
Brand: Haier Pages: 32
Haier C3010 User Manual preview
C3010
Brand: Haier Pages: 33

Brands by name

Popular brands

Load more brands