manualshive.com logo in svg

Cisco 7942G - Unified IP Phone VoIP, Software Manual

The Cisco 7942G is a highly efficient Unified IP Phone VoIP for seamless communication. To enhance your user experience, download the comprehensive Administration Manual free of cost from our website. This manual provides step-by-step instructions and insights on utilizing the product to its full potential.

Share
Download
background image

 

7-3

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0

OL-15483-01

Chapter 7      Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone

    Status Menu

  •

Expansion Modules—Displays the Expansion Module(s) screen, which shows information about the 
Cisco Unified IP Phone Expansion Module, if connected to the phone. For more information, see 
the 

“Expansion Module Status Screen” section on page 7-11

.

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated. 
You can access this screen at any time, even if the phone has not finished starting up. 

Table 7-2

 describes 

the status messages that might appear. This table also includes actions you can take to address errors.

To display the Status Messages screen, follow these steps:

Procedure

Step 1

Press the 

Settings

 button.

Step 2

Select 

Status.

Step 3

Select 

Status Messages.

To remove current status messages, press the 

Clear

 softkey.

To exit the Status Messages screen, press the 

Exit

 softkey.

Table 7-2

Status Messages on the Cisco Unified IP Phone 

Message

Description

Possible Explanation and Action

BootP server used

The phone obtained its IP address from a 
BootP server rather than a DHCP server.

None. This message is informational only.

CFG file not found

The name-based and default 
configuration file was not found on the 
TFTP Server.

The configuration file for a phone is created when the 
phone is added to the Cisco Unified Communications 
Manager database. If the phone has not been added to 
the Cisco Unified Communications Manager 
database, the TFTP server generates a 

CFG File Not 

Found

 response.

  •

Phone is not registered with Cisco Unified 
Communications Manager.

You must manually add the phone to Cisco 
Unified Communications Manager if you are not 
allowing phones to auto-register. See the 

“Adding 

Phones with Cisco Unified Communications 
Manager Administration” section on page 2-11

 

for details.

  •

If you are using DHCP, verify that the DHCP 
server is pointing to the correct TFTP server. 

  •

If you are using static IP addresses, check 
configuration of the TFTP server. See the 

“Network Configuration Menu” section on 
page 4-5

 for details on assigning a TFTP server.

Summary of Contents for 7942G - Unified IP Phone VoIP



















































































































































































































Reviews:

No comments

Related manuals for 7942G - Unified IP Phone VoIP

Audiovox TRAN-410A Owner Operating Instructions preview
TRAN-410A
Brand: Audiovox Pages: 13
Ericsson CF888 User Manual preview
CF888
Brand: Ericsson Pages: 75
Doro PhoneEasy 618 User Manual preview
PhoneEasy 618
Brand: Doro Pages: 68
OfficeServ SOHO WIP-5000M Quick Installation Manual preview
SOHO WIP-5000M
Brand: OfficeServ Pages: 63
Mobistel Cynus T7 User Manual preview
Cynus T7
Brand: Mobistel Pages: 24
Samsung SGHA637 User Manual preview
SGHA637
Brand: Samsung Pages: 166
Samsung SGHT679M User Manual preview
SGHT679M
Brand: Samsung Pages: 45
IPRO i3241 User Manual preview
i3241
Brand: IPRO Pages: 35
Lava Iris win1 User Manual preview
Iris win1
Brand: Lava Pages: 55
Zte Grand X 4 Quick Start Manual preview
Grand X 4
Brand: Zte Pages: 7
Medion LIFE P63008 Instruction Manual preview
LIFE P63008
Brand: Medion Pages: 309
Mitsubishi T200 User Manual preview
T200
Brand: Mitsubishi Pages: 73
Zte Blade V320 User Manual preview
Blade V320
Brand: Zte Pages: 27
Denver FAS-24100M User Manual preview
FAS-24100M
Brand: Denver Pages: 19
Baumer Ident OIS-P PC 3100 series Installation Manual preview
OIS-P PC 3100 series
Brand: Baumer Ident Pages: 46
Zte 7540N Quick Start Manual preview
7540N
Brand: Zte Pages: 14
OBI S451 User Manual preview
S451
Brand: OBI Pages: 41
iPECS LDP-9008D User Manual preview
LDP-9008D
Brand: iPECS Pages: 192

Brands by name

Popular brands

Load more brands