Cisco 7942G - Unified IP Phone VoIP Software Manual Download

Page: 83 / 210

4-17

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0

OL-15483-01

Chapter 4 Configuring Settings on the Cisco Unified IP Phone

Device Configuration Menu

NTP Configuration Menu

The NTP Configuration menu displays information about the NTP server and mode configuration used
by the phone.

Table 4-12

describes the options on this menu.

UI Configuration Menu

The UI Configuration menu displays the status of various user interface features on the phone.

Table 4-13

describes the fields in this menu.

Network Locale
Version

Version of the network locale loaded on the
phone.

Display only—cannot configure.

NTP Configuration

(SIP phones only)

Menu to view information on NTP server and
mode configuration. For more information, see

NTP Configuration Menu, page 4-17

From Cisco Unified Communications Manager
Administration, choose

System > Phone NTP

Reference

Table 4-11

Locale Configuration Menu Options (continued)

Option

Description

To Change

Table 4-12

NTP Configuration Menu Options

Option

Description

To Change

NTP Server 1

IP address of the primary NTP server.

Use Cisco Unified Communications Manager
Administration to modify.

NTP Server 2

IP address of the secondary or backup NTP
server.

Use Cisco Unified Communications Manager
Administration to modify.

NTP Mode 1

Primary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.

Use Cisco Unified Communications Manager
Administration to modify.

NTP Mode 2

Secondary server mode. Supported modes are
Directed Broadcast, Unicast, Multicast, Any cast.

Display only—cannot configure.

Table 4-13

UI Configuration Menu Options

Option

Description

To Change

Auto Line Select

Indicates whether the phone shifts the call focus
to incoming calls on all lines.

When this option is disabled, the phone only
shifts the call focus to incoming calls on the line
that is in use. When this option is enabled, the
phone shifts the call focus to the line with the
most recent incoming call.

Default: Disabled

From Cisco Unified Communications Manager
Administration, choose

Device > Phone > Phone Configuration

BLF for Call Lists

Indicates whether the Busy Lamp Field (BLF) is
enabled for call lists.

From Cisco Unified Communications Manager
Administration, choose

System > Enterprise

Parameters

Summary of Contents for 7942G - Unified IP Phone VoIP



















































































































































































































Search results

Summary of Contents for 7942G - Unified IP Phone VoIP

Reviews:

Related manuals for 7942G - Unified IP Phone VoIP

Brands by name

Popular brands

Cisco 7942G - Unified IP Phone VoIP, Software Manual

Search results

Summary of Contents for 7942G - Unified IP Phone VoIP

Reviews:

Related manuals for 7942G - Unified IP Phone VoIP

Brands by name

Popular brands