manualshive.com logo in svg

Cisco 7942G - Unified IP Phone VoIP, Software Manual

The Cisco 7942G is a highly efficient Unified IP Phone VoIP for seamless communication. To enhance your user experience, download the comprehensive Administration Manual free of cost from our website. This manual provides step-by-step instructions and insights on utilizing the product to its full potential.

Share
Download
background image

 

B-1

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0

OL-15483-01

A P P E N D I X

B

Feature Support by Protocol for Cisco Unified 
IP Phone 7962G and 7942G

This appendix provides information about feature support for the Cisco Unified IP Phone 7962G and 
7942G using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 7.0.

Table B-1

 provides a high-level overview of calling features and their support by protocol. This table 

focuses primarily on end-user calling features and is not intended to represent a comprehensive listing 
of all available phone features. For details about user interface differences and feature use, refer to the 

Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager 
7.0.

This guide is available at this URL:

http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html

The specific sections that describe the features in the phone guide are referenced in 

Table B-1

.

Table B-1

Cisco Unified IP Phone 7962G and 7942G Feature Support by Protocol 

Features

Cisco Unified IP Phones 7962G, 7942G

For More Information

SCCP

SIP

Calling Features

Abbreviated Dialing

Supported

Supported

“Basic Call Handling—Placing a Call: Additional 
Options” 

Audible Message Waiting 
Indicator

Supported

Supported

“Accessing Voice Messages”

Auto Answer

Supported

Supported

“Using a Handset, Headset, and 
Speakerphone—Using Auto Answer” 

Auto Dial

Supported

Supported

“Basic Call Handling—Placing a Call: Basic 
Options” 

Barge (and cBarge)

Supported

Supported

“Advanced Call Handling—Using a Shared Line” 

Busy Lamp Field (BLF) 
Pickup

Supported

Supported

“Advanced Call Handling—Using BLF to 
Determine a Line State”

Busy Lamp Field (BLF)

Supported

Supported

“Advanced Call Handling—Using BLF to 
Determine a Line State” 

Call Back

Supported

Supported

“Basic Call Handling—Placing a Call: Additional 
Options” 

Summary of Contents for 7942G - Unified IP Phone VoIP



















































































































































































































Reviews:

No comments

Related manuals for 7942G - Unified IP Phone VoIP

Haier M180 Guía Del Usuario preview
M180
Brand: Haier Pages: 24
Yealink T31P Manual preview
T31P
Brand: Yealink Pages: 6
Samsung Rugby II SGH-A847 User Manual preview
Rugby II SGH-A847
Brand: Samsung Pages: 187
BENQ-SIEMENS EF51 User Manual preview
EF51
Brand: BENQ-SIEMENS Pages: 132
Caliber HFB 400 User Manual preview
HFB 400
Brand: Caliber Pages: 10
HANNspree HANNSzephyr User Manual preview
HANNSzephyr
Brand: HANNspree Pages: 75
T-Comfort Comfort Pro P100 User Manual preview
Comfort Pro P100
Brand: T-Comfort Pages: 148
Blackberry Vodafone 8700v Getting Started Manual preview
Vodafone 8700v
Brand: Blackberry Pages: 30
Alcatel one touch 219C User Manual preview
one touch 219C
Brand: Alcatel Pages: 27
Mobistel Cynus T7 User Manual preview
Cynus T7
Brand: Mobistel Pages: 24
bq Aquaris E5 4G User Manual preview
Aquaris E5 4G
Brand: bq Pages: 88
HTC U11+ User Manual preview
U11+
Brand: HTC Pages: 4
Grandstream Networks GXP3000 User Manual preview
GXP3000
Brand: Grandstream Networks Pages: 56
DDM Brands ANDY AC4E Manual preview
ANDY AC4E
Brand: DDM Brands Pages: 74
Emerson AMS Trex User Manual preview
AMS Trex
Brand: Emerson Pages: 214
Zte BLADE VANTAGE User Manual preview
BLADE VANTAGE
Brand: Zte Pages: 158
Sony XQ-CT72 Startup Manual preview
XQ-CT72
Brand: Sony Pages: 2
Sony Xperia ZL Review Manual preview
Xperia ZL
Brand: Sony Pages: 4

Brands by name

Popular brands

Load more brands