4-27
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Related Topics
•
Displaying a Configuration Menu, page 4-2
•
Network Configuration Menu, page 4-5
Security Configuration Menu
The Security Configuration menu that you access directly from the Settings menu provides information
about various security settings. It also provides access to the CTL File screen and the Trust List menu,
if a CTL file is installed on the phone.
Table 4-19
describes the options in this menu.
Note
The phone also has a Security Configuration menu that you access from the Device menu. For
information about the security options on that menu, see the
“Security Configuration Menu” section on
page 4-22
.
LLDP-MED: SW Port
Enables and disables Link Layer Discovery
Protocol Media Endpoint Discovery (LLDP-MED)
on the switch port. Use this setting to force the
phone to use a specific discovery protocol, which
should match the protocol supported by the switch.
Settings include:
•
Enabled—default
•
Disabled
From Cisco Unified Communications Manager
Administration, choose
Device > Phone > Phone Configuration
LLDP Power Priority
Advertises the phone’s power priority to the
switch, enabling the switch to appropriately
provide power to the phones. Settings include:
•
Unknown—default
•
Low
•
High
•
Critical
From Cisco Unified Communications Manager
Administration, choose
Device > Phone > Phone Configuration
LLDP Asset ID
Identifies the asset ID assigned to the phone for
inventory management.
From Cisco Unified Communications Manager
Administration, choose
Device > Phone >
Phone Configuration
.
Table 4-18
Network Configuration Menu Options (continued)
Option
Description
To Change
