manualshive.com logo in svg

Cisco 7942G - Unified IP Phone VoIP, Software Manual

The Cisco 7942G is a highly efficient Unified IP Phone VoIP for seamless communication. To enhance your user experience, download the comprehensive Administration Manual free of cost from our website. This manual provides step-by-step instructions and insights on utilizing the product to its full potential.

Share
Download
background image

 

5-2

Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0

OL-15483-01

Chapter 5      Configuring Features, Templates, Services, and Users

    Telephony Features Available for the Cisco Unified IP Phone

Note

Cisco Unified Communications Manager Administration also provides several service parameters that 
you can use to configure various telephony functions. For more information about service parameters 
and the functions that they control, refer to 

Cisco Unified Communications Manager Administration 

Guide

.

Table 5-1

Telephony Features for the Cisco Unified IP Phone 

Feature

Description 

Configuration Reference

Abbreviated dialing

Allows users to speed dial a phone number by 
entering an assigned index code (1-99) on the 
phone keypad.

Users assign index codes from the User Options 
web pages.

For more information, refer to:

  •

Cisco Unified Communications Manager 
Administration Guide, “

Cisco Unified IP 

Phone Configuration” chapter.

  •

Cisco Unified Communications Manager 
System Guide, “

Cisco Unified IP Phone” 

chapter.

Anonymous Call Block

(SIP phones only)

Allows a user to reject calls from anonymous 
callers.

Refer to the 

Cisco Unified Communications 

Manager Administration Guide,

 “SIP Profile 

Configuration” chapter.

Message Waiting

Defines directory numbers for message-waiting on 
and message-waiting off indicator. A directly 
connected voice-messaging system uses the 
specified directory number to set or to clear a 
message-waiting indication for a particular Cisco 
Unified IP Phone.

For more information, refer to:

  •

Cisco Unified Communications Manager 
Administration Guide, “

Message Waiting 

Configuration” chapter.

  •

Cisco Unified Communications Manager 
System Guide, “

Voice Mail Connectivity 

to Cisco Unified Communications 
Manager” chapter.

Audible Message 
Waiting Indicator 
(AMWI)

A stutter tone from the handset, headset, or 
speakerphone indicates that a user has one or more 
new voice messages on a line.

Note

The stutter tone is line-specific. You hear it 
only when using the line with the waiting 
messages.

For more information, refer to

 Cisco Unified 

Communications Manager System Guide, 
“

Cisco Unified IP Phones” chapter.

Auto Answer

Connects incoming calls automatically after a ring 
or two.

Auto Answer works with either the speakerphone 
or the headset.

For more information, refer to 

Cisco Unified 

Communications Manager Administration 
Guide, “

Directory Number Configuration” 

chapter.

Auto dial

Allows the phone user to choose from matching 
numbers in the Placed Calls log while dialing. To 
place the call, the user can choose a number from 
the Auto Dial list or continue to enter digits 
manually.

Requires no configuration.

Auto-pickup

Allows a user to use one-touch pickup 
functionality for call pickup features. 

For more information, refer to the 

Cisco 

Unified Communications Manager Features 
and Services Guide

, “Call Pickup” chapter.

Summary of Contents for 7942G - Unified IP Phone VoIP



















































































































































































































Reviews:

No comments

Related manuals for 7942G - Unified IP Phone VoIP

Radio Shack CT-400 Owner'S Manual preview
CT-400
Brand: Radio Shack Pages: 64
Tadiran Telecom FlexSet 280S User Manual preview
FlexSet 280S
Brand: Tadiran Telecom Pages: 253
Handspring Treo 300 Brochure preview
Treo 300
Brand: Handspring Pages: 2
Alcatel ONETOUCH POP 7S P330X Quick Start Manual preview
ONETOUCH POP 7S P330X
Brand: Alcatel Pages: 32
Alcatel A206G User Manual preview
A206G
Brand: Alcatel Pages: 51
Snom UC edition 760 Quick Start Manual preview
UC edition 760
Brand: Snom Pages: 2
Maxcom MM823 User Manual preview
MM823
Brand: Maxcom Pages: 109
Ericsson Guest User Manual preview
Guest
Brand: Ericsson Pages: 56
Proolin VoIP Tech CS-830 User Manual preview
CS-830
Brand: Proolin VoIP Tech Pages: 25
ADTRAN Aastra 9133i IP User Manual preview
Aastra 9133i IP
Brand: ADTRAN Pages: 31
FLY ts2060 Manual preview
ts2060
Brand: FLY Pages: 91
Mio Digi Walker 8870 User Manual preview
Digi Walker 8870
Brand: Mio Pages: 223
Aastra Mitel 9143i User Manual preview
Mitel 9143i
Brand: Aastra Pages: 163
SENDO SND251 Manual preview
SND251
Brand: SENDO Pages: 54
Nokia 3330 User Manual preview
3330
Brand: Nokia Pages: 131
Bosch Carephone 62 CRS-H62M-GB User Manual preview
Carephone 62 CRS-H62M-GB
Brand: Bosch Pages: 72
Bosch Carephone 61 User Manual preview
Carephone 61
Brand: Bosch Pages: 52
Overmax vertis 4001 you User Manual preview
vertis 4001 you
Brand: Overmax Pages: 26

Brands by name

Popular brands

Load more brands