29-43
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 29 Configuring IP Unicast Routing
Configuring BGP
Default BGP Configuration
Table 29-9
Default BGP Configuration
Feature
Default Setting
Aggregate address
Disabled: None defined.
AS path access list
None defined.
Auto summary
Enabled.
Best path
•
The router considers as-path in choosing a route and does not compare similar
routes from external BGP peers.
•
Compare router ID: Disabled.
BGP community list
•
Number: None defined. When you permit a value for the community number, the
list defaults to an implicit deny for everything else that has not been permitted.
•
Format: Cisco default format (32-bit number).
BGP confederation identifier/peers
•
Identifier: None configured.
•
Peers: None identified.
BGP Fast external fallover
Enabled.
BGP local preference
100. The range is 0 to 4294967295 with the higher value preferred.
BGP network
None specified; no backdoor route advertised.
BGP route dampening
Disabled by default. When enabled:
•
Half-life is 15 minutes.
•
Re-use is 750 (10-second increments).
•
Suppress is 2000 (10-second increments).
•
Max-suppress-time is 4 times half-life; 60 minutes.
BGP router ID
The IP address of a loopback interface if one is configured or the highest IP address
configured for a physical interface on the router.
Default information originate
(protocol or network redistribution)
Disabled.
Default metric
Built-in, automatic metric translations.
Distance
•
External route administrative distance: 20 (acceptable values are from 1 to 255).
•
Internal route administrative distance: 200 (acceptable values are from 1 to 255).
•
Local route administrative distance: 200 (acceptable values are from 1 to 255).
Distribute list
•
In (filter networks received in updates): Disabled.
•
Out (suppress networks from being advertised in updates): Disabled.
Internal route redistribution
Disabled.
IP prefix list
None defined.
