1-5
Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide
OL-11497-03
Chapter 1 Product Overview
Product Description
•
All power modules and other field replaceable units (FRUs), except for the
air blower module and the power distribution unit (PDU), can be removed
from the front of the chassis.
•
All source power connections are located at the rear of the chassis on the
PDU. (See
Figure 1-2
.)
•
Enhanced models have a new stylish front door that hides router cabling. The
door can be installed to open from the right side or left side to give you total
flexibility.
•
Network Equipment Building Systems—Cisco 12006 and Cisco 12406
routers comply with the Network Equipment Building System (NEBS)
Criteria Level 3 requirements defined in SR-3580 for flammability,
structural, and electronics compliance.
•
Electromagnetic Compatibility and Electrostatic Discharge Compliant—
Cisco 12006 and Cisco 12406 routers comply with emissions, immunity, and
electrostatic discharge (ESD) standards for both product and packaging.
•
Bonding and Grounding—Bonding and grounding for safety, circuit
protection, noise currents, reliability, and operations compliance.
•
Environmental Monitoring—Cisco 12006 and Cisco 12406 router complies
with environmental monitoring standards for operating temperature and
humidity, as well as handling temperature and humidity (except for heat
dissipation).
•
Shock and Vibration—Cisco 12006 and Cisco 12406 routers have been
shock- and vibration-tested for operating ranges, handling, and earthquake
standards to NEBS (Zone 4 per GR-63-Core). These tests have been
conducted in earthquake environment and criteria, office vibration and
criteria, transportation vibration and criteria, and packaged equipment shock
criteria.
