3-9
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-06
Chapter 3 Using the QuickStart Wizard
Using the QuickStart Wizard
ARC4 is compatible with RC4™ RSA Data Security; ARC2 is compatible with
RC2™ RSA Data Security.
Enter the security policy for ssl-server ‘myServer’ [default]:
At the prompt, enter the name of the security policy to use, or simply press Enter
to use the “default” security policy. The “strong” policy includes the most secure
algorithms. The “weak” policy algorithms are less secure and appropriate for
export use. The “default” policy algorithms are those most commonly used. See
Appendix F for more algorithm information. If you enter an invalid security
policy name, you receive an error message and are prompted to re-enter the name.
Note
When using the QuickStart wizard in FIPS Mode, only security
policies containing one or more FIPS-compliant algorithms are
available.
After the name of the security policy is accepted, you are prompted to verify the
logical secure server configuration.
SSL-SERVER ‘myServer’ SUMMARY
The following SSL-server will be created:
SSL-server name
:myServer
IP address
:10.1.2.3
Secure Port
:443
Clear Port
:80
Key name
:default
Cert name
:default
Security Policy name
:strong
Is the above information correct? (y/n) :
If the information is correct, type y. The logical secure server you have configured
is created. If you type n, the server configuration process restarts using the current
secure server.
Would you like to use the QuickStart wizard to create another
ssl-server? (y/n):
