D-13
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-06
Appendix D MiniMax Command Summary
Command Set
Usage Guidelines
(This command must be entered on one line.)
Examples
The following example demonstrates setting the “Network” interface to 100Mbit
and full duplex.
>> eaddr -f p 0 s 100
The example below shows how to set the last three octets of the MAC addresses
of both interfaces, beginning with the address specified.
>> eaddr -ib 010000
env
Prints the nvram environment to the console.
env
b
Option indicating the specified Ethernet interface(s)
should be configured using the subsequent argument
as the last three octets of the MAC address. When the
-i option is used to indicate both interfaces are to be
configured, the specified argument is used as the
address for the “Network” port and the argument is
incremented for the “Server” interface address.
threeoctets
The last three octets of the address. This argument
should be entered as hex values.
B
Option indicating the specified Ethernet interface(s)
should be configured using the subsequent argument
as the octets of the MAC address. When the -i option
is used to indicate both interfaces are to be configured,
the specified argument is used as the address for the
“Network” port and the argument is incremented for
the “Server” interface address.
sixoctets
The octets of the address. This argument should be
entered as hex values.
