5-9
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-06
Chapter 5 Graphical User Interface Reference
General Configuration Examples
Figure 5-4
Resetting IP Information Configuration Example
3.
Click Update. The Status area tells you that the connection switches to the
new address in 20 seconds.
Note
In certain situations, such as when changing to a different subnet,
redirection might not occur. If the connection is not redirected,
manually connect to the device. If you still are unable to connect, use
the serial configuration manager to check the device configuration
and try again.
Example: Configuring an Ethernet Interface
1.
Click Network to activate the Network tabs.
2.
Use the list box in the Network Interface or Server Interface panel of the
Settings tab to change the Ethernet interface settings. The Settings page is
shown in Figure 5-5.
