6-7
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-06
Chapter 6 FIPS Operation
Command Changes
Command Changes
When the device is operated in FIPS Mode, some commands are unavailable or
behave differently than in normal operating modes.
Unavailable Commands
Commands are unavailable in FIPS Mode are shown in Table 6-1, below.
Differing Command Behaviors
Some commands behave differently while the Secure Content Accelerator is in
FIPS Mode. These commands and notes about their usage are presented in
Table 6-2, below.
Table 6-1
Unavailable Commands
Operational Mode
Command
Top Level Mode
show telnet, show web-mgmt, write file
Configuration Mode
telnet access-list, telnet enable, telnet port,
web-mgmt access-list, web-mgmt enable,
web-mgmt port
