Circutor Computer SMART III FAST 12, Instruction Manual

Page: 30 / 112

4�4�3� ANALOGUE BAR
Figure 14: Analogue Bar
This bar is displayed on the measurement screens, and can show:

the current of each phase as a percentage.

the current THD of each phase.

the power connected to the capacitor bank.
The parameter to be displayed is selected in the setup menu. (
“5.15.- ANALOGUE BAR”
)
The display screen also shows the results of the TEST and the load % of the capacitors.
4�4�4� OTHER SYMBOLS ON THE DISPLAY
The display also shows the following:
Alarm
: When the unit detects an alarm, the backlight of the display flashes and the alarm
icon lights up. The cause of the alarm can be seen on the active alarms screen. (
"4.6.- OPERATING
STATES”
)
Target cosine : The icons indicate which one of the 4 possible target cosines has been
selected. (
“5.3.- TARGET COS φ ”
)
Editing locked / unlocked: The editing of the programming parameters is password pro-
tected. These icons indicate whether or not this option is locked.
30
Computer SMART III FAST
Instruction Manual