Circutor Computer SMART III FAST 12, Instruction Manual

Page: 51 / 112

Active alarms Parameters
Active alarm code E01 to E017
(
Table 10
)
If there are more than 4 alarms, the information
is scrolled on the screen.
4�6�2� TEST STATUS
This status is identified by the symbol in the unit status area of the display (
Figure 12
).
The stages can be connected and disconnected manually, and the measured parameters that relate
to each one of the stages can be displayed. It also comprises the AutoTest function, which scans and
calculates all the stages of the unit.
A very long press (> 10s) of the key in any of the measurement screens causes the unit to
enter the Test status.
A very long press (> 10s) of the key in any of the test screens causes the unit to return to
the Measurement status.
Use keys and to browse the various screens.
If 5 minutes pass without any keys being pressed, the unit returns to the main screen.
Disconnection screen Parameters
Transition screen: used for the unit to disconnect
all the stages automatically before entering Test
status.
While in this screen, the unit does not respond
to the keys.
The unit automatically exits this screen, and this
can take a certain amount of time.
51
Instruction Manual
Computer SMART III FAST