5�15�- ANALOGUE BAR
At this point the parameter to be displayed in the analogue bar is configured (
)
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
The following display options are available for the analogue bar:
POTC
: the percentage of power connected to the capacitor bank relative to the total power.
THdI
: the Current THD of each phase.
I
: the current % of each one of the phases.
nO
: no parameters are displayed.
The
key shows the next option.
The
key shows the previous option.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
87
Instruction Manual
Computer SMART III FAST
Summary of Contents for Computer SMART III FAST 12
