Maximum value:
999 mA.
Minimum value:
1 mA.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
“
.
5�29�- NO� OF OPERATIONS ALARM
In this point the number of operations of any of the stages above which the alarm
E17
will be
triggered can be configured.
Note:
The alarm must be enabled
(
).
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified.
There are thousands of operations (k), so a value of 100 k will mean 100,000 operations.
The
key increases the digit value.
The
key decreases the digit value.
The
key skips to the previous digit and the
key skips to the next digit.
Press
to validate the data; the
symbol disappears from the display.
Maximum value:
99999 k.
Minimum value:
1 k.
If the value entered is lower than the minimum value or higher than the maximum value, the backlight
of the display flashes and the value entered is replaced with the minimum or maximum value, or with
the last value validated.
Press the
key to access the next programming step.
102
Computer SMART III FAST
Instruction Manual
Summary of Contents for Computer SMART III FAST 12
