5�14�- DISPLAY
In this point the lighting status of the screen and its language can be configured.
Press the
key to enter editing mode. It is identified by the
symbol and the blinking of the
digits to be modified
The following display configuration options are available:
ON
: the display light is always on.
OFF
: the light is always off.
AUTO
: the light comes on when a key is pressed and switches off when no keys have been
pressed for 5 minutes.
The light level is also configured between 0 % and 100 % when the display is on.
The display language options are as follows:
ESP
: Spanish,
EnG
: English,
FrA
: French,
Tr
, Turkish.
The
key increases the digit value or shows the next option.
The
key decreases the digit value or shows the next option.
The
key skips to the previous parameter.
The
key skips to the next parameter.
Press
to validate the data; the
symbol disappears from the display.
Press the
key to access the next programming step.
If no keys are pressed for 5 minutes, the unit switches to the simulation screen,
.
86
Computer SMART III FAST
Instruction Manual
Summary of Contents for Computer SMART III FAST 12
