Circontrol Post eVolve Smart Series, Service Manual

Page: 73 / 152

SERVICE MANUAL – Post eVolve Smart
10 - CHARGE POINT ADVANCED SETTINGS
CIRCONTROL, S.A. – Innovació, 3 – 08232 – Viladecavalls (Barcelona)
Tel.: +34 937 362 940 – Fax: +34 937 362 941 71
Web: www.circontrol.com – E-mail:
circontrol@circontrol.com
10.3 AUTHORIZATION MODE
Charge Point allows to choose between the following types of authorization:
• User: sends 1 authorization request to the central system. Select this option when
OCPP is activated in the Charge Point.
• Plug: sends an authorization request for each plug that is in “available” status.
In order to change from one to another mode, follow the steps below:
STEP ACTION
1
Set the IP address from the Charge Point.
IP address shall be previously assigned using IPSetup.
2
Select “ Charge Point ” at “General” menu.
3 Choose the desired Authorization Mode.
6 Click on “ Save ” button and wait until the process ends.
For further information please, refer to Charge Point Manager Instruction Manual.