SERVICE MANUAL
–
Post eVolve Smart
8 - OTHER DEVICES
CIRCONTROL, S.A.
–
Innovació, 3
–
08232
–
Viladecavalls (Barcelona)
Tel.: +34 937 362 940
–
Fax: +34 937 362 941
41
Web: www.circontrol.com
–
E-mail:
8.3
POWER SUPPLY (9)
8.3.1
MAIN POWER SUPPLY
The main power supply is a device that converts the 230Vac voltage to
12Vdc to supply power to different devices inside Charge Point (RFID
reader, CCL1-MINI device, etc.).
-
Check output voltage at every Charge Point maintenance
of, in order to ensure that all devices will work properly.
-
CCL1-MINI device will not work properly if the output of
power supply is not at least 12V.
8.3.1.1
TECHNICAL CHARACTERISTICS
A table of technical specifications of the power supply is shown below:
8.3.1.2
WIRING CONNECTION
Following image shows a detailed scheme of the power supply connections. Please,
refer to “
” section for more details.
-VDC
+VDC
Neutral
230 VAC
Phase
230 VAC
-
Each wire connected to the power supply is labelled for identification.
Do not connect in reverse order; it could cause irreparable damage
on the Charge Point equipment.
OUTPUT
INPUT
DC Voltage
12 V
Voltage range
85…264 VAC
Rated current
1.25 A
Frequency range
47…63 Hz
Current range
0….1.25 A
WATHER CONDITIONS
Rated power
15 W
Working temperature
-
30…+70 ºC
Voltage adj. range
10.8-13.2 V
Working humidity
20…90%
