SERVICE MANUAL
–
Post eVolve Smart
7 - CHARGE POINT SLAVE DEVICES
CIRCONTROL, S.A.
–
Innovació, 3
–
08232
–
Viladecavalls (Barcelona)
Tel.: +34 937 362 940
–
Fax: +34 937 362 941
22
Web: www.circontrol.com
–
E-mail:
An external toroidal transformer is no needed to measure current parameters because it
is integrated into the same device.
The CEM-M-RS-485 device is a communication gateway between the CEM-C20 and the
local controller.
7.2.2.1
DEVICE CONFIGURATION PROCEDURE
STEP
ACTION
1
Press and hold button
from CEM-C20 for at least 2 seconds.
2
Press
several times until reach
“SETUP”
.
3
Press and hold button
from CEM-C20 for at least 2 sec
4
Press
two times to arrive to “ADDRESS”
.
5
Press and hold button
from CEM-C20 for at least 2 seconds
to “0”00
6
Press and hold button
from CEM-C20 for at least 2 seconds.
The cursor moves
from “0”00 to 0“0”0
.
7
Press and hold button
from CEM-C20 for at least 2 seconds.
The cursor moves
from 0“0”0 to 00“0”
.
8
Press
several times until reach
00“8”
.
9
Press
two times to arrive to “DONE”
,
wait for “ADRESS” to appear
.
10
Press
one time to arrive to “BAUD”
.
