SERVICE MANUAL
–
Post eVolve Smart
7 - CHARGE POINT SLAVE DEVICES
CIRCONTROL, S.A.
–
Innovació, 3
–
08232
–
Viladecavalls (Barcelona)
Tel.: +34 937 362 940
–
Fax: +34 937 362 941
19
Web: www.circontrol.com
–
E-mail:
7.2
ENERGY METER (17)
7.2.1
SINGLE-PHASE CEM-C10
–
PHASE I
The CEM-C10 device measures, calculates and displays the main electrical parameters
on single-phase electrical wiring.
An external toroidal transformer is no needed to measure current parameters because it
is integrated in the same device.
The CEM-M-RS-485 device is a communication gateway between the CEM-C10 and the
local controller.
7.2.1.1
DEVICE CONFIGURATION PROCEDURE
STEP
ACTION
1
Press and hold button
from CEM-C10 for at least 2 seconds.
2
Press
several times until reach
“SETUP”
.
3
Press and hold button
from CEM-C10 for at least 2 seconds.
4
Press
two times to arrive to “ADDRESS”
.
5
Press and hold button
from CEM-C10 for at least 2 seconds
to “0”00
.
6
Press and hold button
from CEM-C10 for at least 2 seconds.
The cursor moves
from “0”00 to 0“0”0
.
7
Press and hold button
from CEM-C10 for at least 2 seconds.
CEM-C10
CEM-M-RS-485
