Home
/
Chrysler
/
300 SRT 2010
/
Owner'S Manual

Chrysler 300 SRT 2010, Owner'S Manual, Page: 378 / 465

Share

Page: 378 / 465

Chrysler 300 SRT 2010 Owner'S Manual Download Page 378

2. Slide the lid on the filter adapter forward and down
and remove the used filter.

3. Install the new filter with arrows pointing in the
direction of airflow, which is toward the rear of the
vehicle (text and arrows on the filter will indicate this).

Refer to “Maintenance Schedule” for the proper mainte-
nance intervals.

Body Lubrication

Locks and all body pivot points, including such items as
seat tracks, door hinge pivot points and rollers, liftgate,

A/C Air Filter

7

MAINTAINING YOUR VEHICLE

377

«
...
376
377
378
379
380
...
»

Summary of Contents for 300 SRT 2010


















































































































































































































































































































































































































































































Reviews:

No comments