Chrysler 300 SRT 2010 Owner'S Manual Download Page 102

Page: 102 / 465

Phonebook Download — Single Entry

If equipped and supported by your phone, Uconnect™
Phone allows the user to download entries from their
phone via Bluetooth

威

. To use this feature, press the

button and say “Phonebook Download.” The system
prompts, “Ready to accept “V” card entry via
Bluetooth

威

…” The system is now ready to accept phone-

book entries from your phone using the Bluetooth

威

Object Exchange Profile (OBEX). Please see your phone
Owner’s Manual for specific instructions on how to send
these entries from your phone.

NOTE:

•

The phone handset must support Bluetooth

威

OBEX

transfers of phonebook entries to use this feature.

•

Some phones cannot send phonebook entries if they
are already connected to any system via Bluetooth

威

and you may see a message on the phone display that
the Bluetooth

威

link is busy. In this case, the user must

first disconnect or drop the Bluetooth

威

connection to

the Uconnect™ Phone, and then send the address
book entry via Bluetooth

威

. Please see your phone

Owner’s Manual for specific instructions on how to
drop the Bluetooth

威

connection.

•

If the phonebook entry is longer than 24 characters, it
will only use the first 24 characters.

Edit Uconnect™ Phonebook Entries

NOTE:

•

Editing names in the phonebook is recommended
when the vehicle is not in motion.

•

Automatic downloaded phonebook entries cannot be
deleted or edited.

•

Press the

button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

⬙

Phonebook Edit.

⬙

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

101

Summary of Contents for 300 SRT 2010


















































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT 2010

Reviews:

Chrysler 300 SRT 2010, Owner'S Manual, Page: 102 / 465

Search results

Summary of Contents for 300 SRT 2010

Reviews: