Home
/
Chrysler
/
300 SRT 2010
/
Owner'S Manual

Chrysler 300 SRT 2010, Owner'S Manual, Page: 133 / 465

Share

Page: 133 / 465

Chrysler 300 SRT 2010 Owner'S Manual Download Page 133

NOTE:

Ensure that the front of the head restraint is

facing toward the front of the vehicle.

WARNING!

Driving a vehicle with the head restraints removed or
improperly adjusted could cause serious injury or
death in the event of a collision. The head restraints
should always be checked prior to operating the
vehicle and never adjusted while the vehicle is in
motion. Always adjust the head restraints when the
vehicle is in PARK.

Heated Seats

This feature heats the front driver, passenger, and second
row seats. The controls for each heater are located near
the bottom center of the instrument panel.

After turning the ignition ON, you can choose from High,
Low, or Off heat settings. Amber indicator lights in each
switch indicate the level of heat in use. Two indicator
lights will illuminate for High, one for Low, and none for
Off.

Front Heated Seat Switch

132

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
131
132
133
134
135
...
»

Summary of Contents for 300 SRT 2010


















































































































































































































































































































































































































































































Reviews:

No comments