Chrysler 300 SRT 2010 Owner'S Manual Download Page 161

Page: 161 / 465

WARNING DISPLAY DISTANCES

DISPLAY INDICA-

TOR

OBSTACLE DISTANCE FROM:

INDICATOR

COLOR

AUDIBLE SIGNAL

REAR CORNERS

REAR CENTER

Inner LED

79 in (200 cm)

Yellow

Yes, Half Second

1st LED

51.2 in (130 cm)

Yellow

2nd LED

45.3 in (115 cm)

Yellow

3rd LED

31.5 in (80 cm)

39.3 in (100 cm)

Yellow

4th LED

25.5 in (65 cm)

33.5 in (85 cm)

Yellow

5th LED

20 in (50 cm)

27.6 in (70 cm)

Yellow

6th LED

16 in (40 cm)

19.7 in (50 cm)

Red

Yes, Intermittent

7th LED

6 in (15 cm)

11.8 in (30 cm)

Red

Yes, Continuous

ParkSense

姞

System Usage Precautions

NOTE:

•

Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense

威

Rear Park

Assist system operating properly.

•

Jackhammers, large trucks, and other vibrations could
affect the performance of the ParkSense

威

Rear Park

Assist system.

160

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 300 SRT 2010


















































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT 2010

Reviews:

Chrysler 300 SRT 2010, Owner'S Manual, Page: 161 / 465

Search results

Summary of Contents for 300 SRT 2010

Reviews: