Home
/
Chrysler
/
300 SRT 2010
/
Owner'S Manual

Chrysler 300 SRT 2010, Owner'S Manual, Page: 339 / 465

Share

Page: 339 / 465

Chrysler 300 SRT 2010 Owner'S Manual Download Page 339

NOTE:

When removing the fuel filler cap, lay the cap

tether in the hook, located on the fuel filler cap door
reinforcement.

CAUTION!

•

Damage to the fuel system or emissions control
system could result from using an improper fuel
tank filler tube cap (gas cap).

•

A poorly fitting gas cap could let impurities into
the fuel system.

•

A poorly fitting gas cap may cause the “Malfunc-
tion Indicator Light (MIL)” to turn on.

•

To avoid fuel spillage and overfilling, do not “top
off” the fuel tank after filling. When the fuel
nozzle “clicks” or shuts off, the fuel tank is full.

Gas Cap Tether Hook

338

STARTING AND OPERATING

«
...
337
338
339
340
341
...
»

Summary of Contents for 300 SRT 2010


















































































































































































































































































































































































































































































Reviews:

No comments