chromasens allPIXA pro, Manual

Page: 215 / 227

Chromasens CD40127_R02 allPIXA_pro_User Manual.docx 215
9.18 Default parameters
The camera is delivered with the following default parameters. (Setting 1)
Sect. Name 4096 5120 6000 7300
9.1.1 Integration time 19.68µs 30.40 µs 35.48 µs 43,25 µs
9.1.2 Use line period Off Off Off Off
9.1.3 Line period time 100 µs 100 µs 100 µs 100 µs
9.2.1 Analog coarse gain -3 dB -3 dB -3 dB -3 dB
9.2.2 Current camera gain values *) *) *) *)
9.2.3 Startup gain values *) *) *) *)
9.2.4 Update start gain values Off Off Off Off
9.3.3 First relative pixel of white reference 1800 2300 2800 3500
9.3.6 Number of pixels for white reference 100 100 100 100
9.3.7 First image line for the white reference 200 200 200 200
9.3.8
Number of image lines for the white
reference
100 100 100 100
9.3.9 Number of reference samples (Average)
No average No average No average No average
9.3.10 Show white reference border Off Off Off Off
9.4.1 Target white reference values 800 800 800 800
9.4.3 Enable continuous white control Off Off Off Off
9.4.4
Position and mode for white reference
mark
Automatic Automatic Automatic Automatic
9.4.5
White
control
mode
Use sync mode Off Off Off Off
Stop gain control
if level…
Off Off Off Off
Stop gain control by variance Off Off Off Off
9.4.6 Gain control stop factor 0.8 0.8 0.8 0.8
9.4.7 Set gain control stop by variance 0 0 0 0
9.4.8 Set active channels for white control On On On On
9.5.1 Black-level correction (offset correction) On On On On
9.5.2 Black-reference data set 1 1 1 1
9.5.3 Shading correction (flat-field correction) Off Off Off Off
9.5.4 White reference data set 1 1 1 1
9.6.1 Use brightness and contrast Off Off Off Off
9.6.2 Brightness 0 0 0 0
9.6.3 Contrast 0.9 0.9 0.9 0.9
9.7.1 RGB line distance 4 4 4 4
9.7.2 Scan direction Forward Forward Forward Forward
9.7.3
Enable suppression of lines/frame due to
encoder direction
Off Off Off Off
9.7.4 Suppress lines/frames mode
Suppress …
against …
Suppress …
against …
Suppress …
against …
Suppress …
against …
9.8.1 Number of scan lines per image (frame mode) 2000 2000 2000 2500
9.8.2 Image start delay 10 10 500 10
9.8.3 Scan line length 4096 5120 6000 7296
9.8.4 Horizontal binning
1/1 (no
reduction)
1/1 (no
reduction)
1/1 (no
reduction)
1/1 (no
reduction)
9.8.5 Vertical scan line reduction 0 / 0 0 / 0 0 / 0 0 / 0