Chromasens CD40127_R02 allPIXA_pro_User Manual.docx
95
6
Wait for result
A progress bar is shown while the reference is created and stored. When it has finished
successfully, the wizard shows the following message:
To close the wizard and to restore the camera settings, click
Next
.
7
Activate black-level correction and check the result on the image.
On the toolbar, click
Show settings
, and then click
Reference usage
.
To check black-level correction, select the
Activate black-level correction
check box
and check that the just updated data set is used:
At least a few pixels should have a value greater than 0 (for example 1 or 2) in the black
image with activated black-level correction and covered lens. Otherwise, (if
all
pixels
are 0) the image is over-compensated and you should repeat the steps for reference
generation.
Click
Transfer setting to camera
to save the setting to volatile memory.
You may proceed to section 8.4 to generate a shading reference.
