Chromasens CD40127_R02 allPIXA_pro_User Manual.docx
66
Page
Function
Camera settings
– Special functions – Tracing
Tracing:
Debugging functions
Section:
6.7 Opening serial connection to a camera
You can open a different port or re-open the same port directly. It is not necessary to restart
CST and to select it in the dialog box shown during start-up.
Button
Function key
Menu
View/System configuration
To open serial connection to a camera:
1. On the toolbar, click
Show system configuration
.
2. In the
Camera interface
list, click the desired camera connection:
3. In the
Baud rate
list, click a baud rate, or select the
Use max. Baud rate
check box:
If the
Use max. Baud rate
check box is selected, CST and the camera try to get
connected with the highest possible data rate.
4. Click
Open connection
:
The default baud rate of the camera is 115200 Baud at power up.
Some PCs set the reset on RS232 to high as default. Therefore, this option has to be
disabled. This refers only to serial ports of the PC; it does not affect the ports provided by the
Camera Link.
