chromasens allPIXA pro, Manual

Page: 212 / 227

Chromasens CD40127_R02 allPIXA_pro_User Manual.docx 212
9.17.4 Average size for the encoder
Name
Name Average size
Function
Sets the number of increments taken for distance measurement to average
the speed measurement
Channels All
Unit
Integer
None; 2x; 4x; 8x; 16x
Dependency
Only available if Encoder (Continue update) is selected at Synchronization
mode .
Notes
Best results are reached with encoder mode 0 and without encoder
averaging. This mode avoids errors due to tolerances in the duty factor of the
pulses
Camera Value
Lower limit All No averaging
2
4
8
Upper limit All 16
9.17.5 Encoder resolution
Name
Name
Encoder resolution
Function
Sets the distance of which the transport might be moved by one increment of
the encoder.
Channels
Unit
Float
Step:
0.001
µm per full increment
Dependency
Only available if Encoder (Continue update) is selected at Synchronization
mode .
Notes Refers to a full increment of the encoder.
Camera Value CST
Lower limit All 0 µm
Upper limit
All 100,000 µm
NOTE The value Encoder pulses per line is calculated internally by the camera and
may not exceed 255. Recommended values are between 0.5 and 255. Take
notice that values less than 0.5 cause a decrease in transport resolution
accuracy. For information about calculation, see section 9.17.6