Christie RPMSP-D132U, User Manual

Page: 53 / 134

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual 3-19
020-100245-03 Rev. 1 (11-2010)
1. From the presentation level, press to display the main menu.
2. P ress , to display the Channel Setup menu or move the highlight to the Channel Setup option and
press . The Channel Setup menu will appear.
3. Select the relevant channel and press to edit parameters shown in the Channel Setup menu
The Channel Edit menu will appear similar to the sample shown in Figure 3-17 Channel Edit Menu
(SAMPLE) .
F
IGURE
3-17 C
HANNEL
E
DIT
M
ENU
(SAMPLE)
4. Review or edit the following channel setups in the Channel Edit menu:
•
CHANNEL NAME:
An alpha-numeric label can be defined and/or changed here. Channel names can be up
to 12 characters in length.
•
CHANNEL NUMBER:
A 2-digit channel number can be changed here. If you enter an existing channel
number, a dialog message appears indicating that this number is already in use–assign a different chan-
nel number. You can define up to 50 channels.
•
INPUT:
1-5, corresponding to where on the projector’s input panel the source is connected.
•
IN MENU:
If checked (default, except for automatically defined channels with unchanged parameters),
this defined channel will then appear in the list available when key is pressed. If unchecked, the
channel must be accessed via on the keypad or via the “Auto Source” function.
NOTE:
On-screen display of the channel list is an option that must be set in the Menu Preferences menu.
•
AUTO SOURCE:
If checked, (default), the projector can automatically locate this channel when an incom-
ing input signal matches. If not checked, the projector can locate the selected channel only when it is
directly selected via on the keypad—and a change in input signal will not result in a channel
change.
•
LOCKED:
If checked, all image settings for this channel are disabled. If unchecked (default), all available
image settings can be adjusted. Auto Setup cannot be used with a locked channel.
•
PREVIOUS CHANNEL:
Select this option to see or change Channel Edit settings for the previous channel
in the Channel Setup list.
•
NEXT CHANNEL:
Select this option to see or change Channel Edit settings for the next channel in the
Channel Setup list.
Menu
3
Channel
Channel
Channel