Christie RPMSP-D132U, User Manual

Page: 85 / 134

Section 4: Advanced Configuration and Controls
RPMSP-D132U & RPMSP-D180U User Manual User Manual 4-17
020-100245-03 Rev. 1 (11-2010)
NOTE
HD interlaced sources are not recommended for the PIP window.
Other PIP or Seamless Switching tips include:
• When using two digital signals or one analog and one digital, each must be 165 megapixels/sec.
• When using two analog signals, each must be 90 megapixels/sec.
• Avoid using an interlaced source in the PIP window
• Seamless switching may affect image quality in some cases
4.11.1 Working with PIP
NOTE:
To control the primary image, access all picture controls through the Main menu. To control the
secondary (PIP) image, access picture controls through the Picture-in-Picture and Switching menu.
F
IGURE
4-19 PIP
AND
S
WITCHING
M
ENU
Use the first of six options in the PIP and Switching menu to enable and define how you want to use PIP .
Swap Main and PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image becomes secondary (PIP),
and the secondary image becomes primary. Swapping is available only when PIP is enabled.
NOTE:
There may be a slight delay when swapping the Primary and Secondary images.
PIP Enable
#3 Decoded signals (Input 3, Input 4, Composite video, S-Video, or any
video signal via Input 1 BNC connectors or via an analog option card).
#4 Analog Option Cards
#5 Digital Option Cards