Christie RPMSP-D132U, User Manual

Page: 18 / 134

2-6 RPMX/RPMSP-D132U & RPMSP-D180U User Manual
020-100245-03 Rev. 1 (11-2010)
Section 2: Installation and Setup
8. Reconnect all cables disconnected previously in step 2. Refer to Figure 2-1 Internal Cable Connections .
Step 3 Calculating throw distance, position and mount projector
Throw Distance
For lens-horizontal configurations, throw distance is measured from the center of the auxiliary mounting holes
in the tray to the screen. Use the appropriate formula for your projector model when calculating.
In both vertical and horizontal configurations:
TD = Throw Distance
W = screen width in millimeters
See Figure 2-7 Throw Distance Formula for Lens-Horizontal Configuration for an illustration of the formula.
RPMX-D132U For XGA (0.69:1 lens). TD = 0.69 x W +54 mm
RPMSP-D132U
For SXGA+ (0.69:1 lens). TD = 0.69 x w +54 mm
For SXGA+ (1.20:1 lens). TD = 1.2 x W + 29 mm
RPMSP-D180U
For SXGA+ (0.69:1 lens). TD = 0.69 x W + 33 mm
For SXGA+ (1.20:1 lens). TD = 1.2 x W + 29 mm
6 screws
F
IGURE
2-6 S
ECURE LIGHT ENGINE TO CONFIGURATION