Christie RPMSP-D132U, User Manual

Page: 74 / 134

4-6 RPMSP-D132U & RPMSP-D180U User Manual User Manual
020-100245-03 Rev. 1 (11-2010)
Section 4: Advanced Configuration and Controls
4.7.5 Broadcast Key
Enter a checkmark for keypad commands sent to any one projector to be relayed to all projectors in a serial
network. The key will temporarily “override” the effect of a broadcast setting and allow you to control a
specific projector when necessary. Remove the Broadcast Key checkmark when operating redundant networks.
4.7.6 Front IR Protocol
This option cannot be disabled. Select “Any”, to enable the projector. Use this option to select a keypad or
select a specific protocol for use with the keypad. There are up to 8 protocols that can be selected. This
prevents a keypad from one projector interfering with another.
ARTNET BASE CHANNEL When advanced mode is enabled, the projector listens to data on 64 consecutive channels or
10 consecutive channels when not enabled. The projector processes requests beginning with
the ‘base channel’ defined here. The requests implement these functions:
DMX
CHANNEL FUNCTION VALUE
Base Shutter Open (0-64), No Action (65-192), Closed (193-255)
Base +1 Slider Lock Locked (0-254), Unlocked *(255)
Base +2 Input* Input # (1-8)
Base +3 Channel * Channel #(1-99)
Base +4 Lens-vertical *+ Lens down(0), Stop(1-124), Lens Up(255)
Base +5 Lens-horizontal *
+
Lens Right(0), Stop(1-254), Lens Left(255)
Base +6 Lens – Focus * + Negative Focus(0), Stop(1-254), Positive Focus(255)
Base +7 Lens- Zoom * + Zoom Out(0), Stop (1-254), Zoom In (255)
Base +8 Power * Power Off(0), No Action(1-254), Power On(255)
Base +9 None
* Functions are only active when the Slider Lock is set to Unlocked
NOTE: Make sure the channels DO NOT overlap another device. Example:
GOOD BAD
Proj1_Base = 0 Proj1_Base = 5
Proj2_Base = 10 Proj2_Base = 9
Proj3_Base = 20 Proj3_Base = 11
DEVICE NAME Used to name each device; some ArtNet servers support querying for devices.
DEVICE DESCRIPTION More information that is returned when a “device query” is done.
Proj