Christie RPMSP-D132U, User Manual

Page: 51 / 134

Section 3: Operation
RPMX/RPMSP-D132U & RPMSP-D180U User Manual 3-17
020-100245-03 Rev. 1 (11-2010)
What Appears in Channel Setup Menu?
This menu lists all channels defined and indicates where they are connected on the input panel . The far left
column lists channel numbers currently defined. The values in the far right columns indicate horizontal and
vertical frequencies—if someone has defined a name for this channel, it appears here. Remaining columns
contain details pertaining to each channel setup, such as its switcher number (0 = projector), slot location, a
variety of icons indicating access to each channel, and an abbreviated description of each signal type. See
Editing a Channel Setup for details.
NOTE:
Use and to see channels not visible in the initial display of channels.
Signal Type
Both the key list and the Channel Setup menu identify signal types in a shortened form as defined in table
3.2. These descriptors indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an “i” (interlaced signals) or “p” (progressive signal“).
Table 3.3 Abbreviations for Signal Type
3.4.4 Copying or Deleting Channels
Copying channels is a quick method for creating numerous channels, each of which can then be edited and
adjusted for a variety of presentations in the future.
Copying a Channel
1. Highlight the channel in the Channel Setup menu.
2. Press to go to the Channel Copy/Delete submenu.
3. Select “Copy” and press
. A new channel is created (identical to original which still exists) identified
with the next available number from 01-50.
ABBREV SIGNAL TYPE
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green
5W Separate H,V
5WR Separate H,V swapped
SVid S-Vid
CVid Composite Video
Dig Digital
Channel
Func