Christie DD1-WU80P, Service Manual

Page: 54 / 150

52
DWU951 (DD1-WU80P/81P) / DWX951 (DD1-WX80P/81P) / DXG1051 (DD1-X100P/101P)
DWU951/DWX951/DXG1051 Service Manual
020-000674-01 Rev.1 (01-2014) Page 52 / 118
Remember to detach the shading sheets and re-use
them with new UPPER CASE. The service parts does
not include the sheets.
Attach the shading sheet-1 and -2 in turn.
z
As replacement of UPPER CASE
Shading sheet-2
Shading sheet-1
•+!#
torque: 0.68~0.88N
·
m
UPPER CASE
Put the rib on the UPPER
CASE into the slot of the
=! +
Disassembling
Remove 3 screws, and put the wires away
from the hooks.
Assembling
Put the CW UP EXHAUST DUCT on the
# #
Wiring
Wire the cable around CW UP EXHAUST
DUCT as below after attaching it.
Be sure that no wire is left above the duct
+ ?"?&! ?"„K?
IRIS cable, CNHS, CNBL1, CNBL2.
¾ CW UP EXHAUST DUCT
CW UP EXHAUST DUCT
K•+š#
torque: 0.39~0.59N
·
m
•+!#
torque: 0.68~0.88N
·
m
DC RELAY PCB
*?"&&}
Pass the cables on the duct side
of the boss to avoid pinching with
the UPPER CASE.
Make sure no wire rests on the
top of the boss.
CNCS2
Pass CNDCR, CNBL1 and CNBL2 under
the duct and through 4 hooks. Add the
IRIS cable to the 4th, rightmost hook.